Related Manuals for KEC LSMD-121
Summary of Contents for KEC LSMD-121
- Page 1 THIS PRODUCT HAS BEEN DESIGNED, MANUFACTURED AND INSPECTED IN COMPLIANCE WITH THE ISO9001 QUALITY ASSURANCE SYSTEM. Part No. 11906862...
- Page 2 MOBILE APPLICATIONS MODEL: LSMD-121 12.1” LCD INTEGRATED DVD MONITOR RECEIVER SYSTEM INSTALLATION INFORMATION & OPERATING INSTRUCTIONS THIS PRODUCT IS INTENDED FOR PROFESSIONAL INSTALLATION ONLY FOR MOBILE-SPECIFIC 12 VOLT DC-ONLY OPERATION PLEASE READ ALL INSTRUCTIONS BEFORE USING THIS PRODUCT IMPORTANT NOTE :...
-
Page 3: Cautions
CAUTIONS CAUTION : ANY CHANGES OR MODIFICATIONS IN THE CONSTRUCTION OF THIS DEVICE WHICH ARE NOT EXPRESSLY APPROVED BY THE PARTY RESPONSIBLE FOR COMPLIANCE COULD VOID THE USER'S AUTHORITY TO OPERATE THE EQUIPMENT. WARNINGS : TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS UNIT TO RAIN OR MOISTURE. DO NOT OPEN THE CABINET. -
Page 4: Important Safeguards
IMPORTANT SAFEGUARDS 1. Read Instructions All safety & operating instructions should be read before operating the appliance. 2. Retain Instructions The safety and operating instructions should be retained for future reference. 3. Heed Warnings Adhere to ALL warnings on the product and in the operating instructions. 4. -
Page 5: Table Of Contents
TABLE OF CONTENTS We urge you to carefully read all of the descriptions and operating procedures contained in this Owner's Manual before operating your new LSMD-121. CAUTIONS IMPORTANT SAFEGUARDS TABLE OF CONTENTS (THIS PAGE) FEATURES ACCESSORIES IDENTIFICATION OF LSMD-121 CONTROLS & CONNECTORS... -
Page 6: Features
Built-In Stereo FM Transmitter with On-Screen Frequency Selection & Control Built-In Stereo IR Transmitter External Antenna Input 10-Year Memory Back Up The Remote Controller that is packaged with this unit will also control any KEC Mobile Applications Videocassette or DVD Player. NOTES: Automatic Power On Function: This system will automatically power on whenever the LCD screen is lowered to its viewing position. -
Page 7: Accessories
ACCESSORIES Please check to make sure that all of these items have been included: MOBILE APPLICATIONS Ⓡ MODEL: LSMD-121 12.1” LCD INTEGRATED DVD MONITOR RECEIVER SYSTEM INSTALLATION INFORMATION 12V DC Power Extension cable & OPERATING INSTRUCTIONS THIS PRODUCT IS INTENDED FOR PROFESSIONAL INSTALLATION ONLY... -
Page 8: Identification Of Lsmd-121 Controls & Connectors
IDENTIFICATION OF LSMD-121 CONTROLS & CONNECTORS FRONT VIEW 21 20... - Page 9 IDENTIFICATION OF LSMD-121 CONTROLS & CONNECTORS DC INPUT JACK DVD STOP BUTTON For connection to a source of 12 Volt DC power. Use this button to stop playing a disc. EXTERNAL SPEAKERS OUTPUT DVD EJECT BUTTON CONNECTOR Use this button to eject or load a disc.
-
Page 10: Remote Control Use
REMOTE CONTROL USE 1. TV/VIDEO BUTTON Press repeatedly to cycle program source selection between TV, VIDEO, S-VIDEO, YCbCr(Component Video) & PC. This button is duplicated on the TV's Control Panel. 2. DIRECT CHANNEL SELECTION (0 ~ 9 & 100) BUTTONS Used for the direct selection of broadcast channels. - Page 11 The BLUE EXTERNAL VCP button is used to control an EXTERNAL KEC VCP. 18. DVD & VCP CONTROLS These controls are designed to operate KEC Mobile Applications DVD Players and Videocassette Players ONLY. Some controls may operate Products from another manufacturer, but operation will be erratic.
-
Page 12: Remote Control Battery Installation
REMOTE CONTROL USE Remote control sensor NOTES : The Remote control should be directed at the Remote Control sensor just below the LCD Screen as shown above. The maximum operating distance of the Remote Control is about 10 feet. The Remote Control should be kept away from UV exposure which may disrupt its operation. It may be difficult to receive Remote Control signals when UV is present. -
Page 13: Signal Connection
Connector Connect To 2-Pin Mate & Lock KEC VCP or DVD 12V Power Input and Output (Designed to provide power to KEC products ONLY) RCA Plug Yellow (Male) A/V1 Video Output RCA Plug Red (Male) -
Page 14: Audio System
SIGNAL CONNECTION SELECTING THE PROGRAM SOURCE Press the TV/VIDEO button on the Remote Control or LSMD-121 Control Panel to select the desired program source. Repeatedly pressing the button will switch between inputs as follows: Broadcast TV (built-in) DVD VIDEO 1 VIDEO 2 Broadcast TV .. -
Page 15: Power Connection
BLACK: GROUND Power Extension Cable(15foot) NOTE The cable assembly used to connect the LSMD-121 to the 12Volt power supply may vary depending on product packaging. MANUFACTURER : TEASUNG ELECTRIC CO.,LTD. TYPE# : AWM STYLE 1015 WARNING The DC Battery Cord is ONLY for use with this model. Do not use it to power any other product. -
Page 16: Dome Light Connection
DOME LIGHT CONNECTION IMPORTANT NOTE - NEGATIVE & POSITIVE DOOR CIRCUITS: The 4-wire harness for the LSMD121's built-in dome lights is color-coded for use in vehicles that employ a negative door circuit. This includes GM (excepting 2003 and later full-sized SUV's), Chrysler and most imported vehicles. -
Page 17: Installation For Vehicle Use
Install the unit to metal pillars in the vehicle's roof with 4 screws. If the pillars are not conveniently located, secure a 3/8" plywood board to the pillars and mount the LSMD-121 to the plywood board. Use extreme care to insure that tools do not damage the unit. -
Page 18: Lsmd-121 Operation
DVD, VIDEO 1, VIDEO 2) 3. If TV mode has been selected, select the desired channel using the CHANNEL but- tons on the LSMD-121 Control Panel or Remote Control. Pressing the buttons advances to the next lower or higher channel stored in memory. -
Page 19: Menu Button - General Information
2. After selecting the desired mode, press the VOLUME + button on the Remote control. NOTE: TV Broadcast related items - AUTO PROGRAM, CCD & SAP -- are only shown in the TV MENU display if the LSMD-121 is set to TV Mode. -
Page 20: Menu Button - Operations
If you wish to stop the Auto Programming procedure before it is finished, press the VOLUME button. (2) CCD The LSMD-121 incorporates a Closed Caption Decoder (CCD) to enable viewing of CCD and TEXT broadcasts. CCD and TEXT information can only be viewed if they are being broadcat by a television station, or recorded on a videotape or videodisc. - Page 21 Not all stations do, and some stations only broadcast Stereo/SAP material during part of the day. If the LSMD-121 is set to STEREO and no stereo signal is being broadcast, a MONO signal will automati- cally be received.
- Page 22 16 : 9 (5) FM BROADCAST MODE & FM FREQUENCY The LSMD-121 has a built-in FM Stereo Broadcast Transmitter to allow you to listen to the audio signal from the selected program source (TV, DVD, VIDEO1, VIDEO2) through the vehicle's FM radio.
- Page 23 TV MENU BUTTON - OPERATIONS SCAN 88.7MHz SPEAKER <CAR RADIO> NOTES TO INSTALLER The FM Transmitter Antenna (Page 8 # 22) should be installed in the direction of the vehicle's main FM Antenna. Never adjust the LA01 coil on the FM Transmitter board. It was optimally adjusted at the factory. (6) LANGUAGE The on-screen displays may be set to appear in your choice of 4 languages - English, Spanish, Portuguese or French.
-
Page 24: Picture Button
PICTURE BUTTON The PICTURE button allows you to select each picture adjustment element. Press the PICTURE button on the Remote Control or on the LSMD-104 Control Panel to bring up the PICTURE Menu. Press the PICTURE button repeatedly to select the item you wish to adjust. The selected item will change from WHITE to MAGENTA, indicating that it may be adjusted. -
Page 25: Status Button
STATUS BUTTON The STATUS button on the Remote Control lets you select between a CUSTOM adjustable picture setting mode or any one of 3 factory preset picture modes. Pressing the STATUS button repeatedly changes the mode as follows: (1) CUSTOM mode (2) STANDARD mode (3) DYNAMIC mode (4) MILD mode... -
Page 26: Other Useful Functions
OTHER USEFUL FUNCTIONS (1) QUICK VIEW Button Press the Q. VIEW button on the Remote Control. The previously viewed channel will appear on the screen. Press Q.VIEW again to switch back to the original channel. (2) DISPLAY Button Press the DISPLAY button on the Remote Control. The Program Source (Channel # &... -
Page 27: Dvd Function Operation
DVD FUNCTION & OPERATION... -
Page 28: Introduction
INTRODUCTION... - Page 29 INTRODUCTION...
-
Page 30: Disc Requirements/Copyright Information
DISC REQUIREMENTS/COPYRIGHT INFORMATION Before you load a disc, make sure that it is compatible with the player. NOTE The following discs cannot be used with this player: Scratched or otherwise damaged discs All 80mm discs Mini disc (MD) Laser disc (LD) CD-I, CD-ROM, DVD-ROM, DVD-RAM, CDV, CVD, CDG (audio only), Super Audio (except audio layer). -
Page 31: Basic Playback
Playback Turn Power On. Insert a disc WITH THE LABEL FACING UP. Do not use force. The LSMD-121 will automatically switch to DVD mode and begin to read the disc. After a short period of time (depending on the com- plexity of the disc), playback will begin. -
Page 32: Searching For A Specific Screen Or Song During Playback
SEARCHING FOR A SPECIFIC SCREEN OR SONG DURING PLAYBACK You can use one of the function listed below in order to jump to a specific chapter or track during playback Scan at fact forward or fast reverse Press the FR/SR or FF/SB buttons on the remote controller. For DVD playback, pressing the button successively exe- cutes the function in the following order;... -
Page 33: Setting A Custom View
SETTING A CUSTOM VIEW Setting a specific frame within a chapter of a 1/38 Press GOTO button on the remote controller. 4/21 Enter the time location of the frame using the number buttons and then press ENTER. 0:19:00 Setting a specific DVD title or chapter 1. -
Page 34: Changing The Size And Angle Of The Screen
CHANGING THE SIZE AND ANGLE OF THE SCREEN Changing the size of the screen Press the ZOOM button. Pressing the button successively executes the function in the following order: 1600% 400% ZOOM 400% This function is only available during DVD/VCD play- back. -
Page 35: Using The Menu, Title & Subtitle Buttons
USING THE MENU, TITLE & SUBTITLE BUTTONS Selecting a menu listed on the disc Press MENU button. The menu contained on the disc will appear on the screen. The menu appears differently with different discs. This function does not work for a CD. To view the title menu Press the TITLE button. -
Page 36: Using The Setup Menu
USING THE SETUP MENU Pressing SETUP button will show a screen with which various menus can be set. The unit must be in STOP mode in order to display the SETUP Menu. Press the SETUP button, then press ENTER to select the LANGUAGE submenu. -
Page 37: Setting A Menu
SETTING A MENU Selecting a menu language contained in the disc Press SETUP button on the remote controller. L A N G U A G E Go to "LANGUAGE" using the CH , Enter Original English buttons. Spanish German Italian Portuguese Go to "DISC MENU"... -
Page 38: Using The Language
SETTING THE LANGUAGE Selecting audio language Press SETUP button on the remote controller. Go to "LANGUAGE" using the CH , Enter L A N G U A G E buttons. Original English Spanish Go to "AUDIO" using the CH , Enter buttons. German Italian Portuguese... -
Page 39: Setting The Display Options
SETTING THE DISPLAY OPTIONS Press SETUP button on the remote controller. Go to VIDEO using the CH , Enter buttons. Go to the item using the CH , Enter buttons. Choose the desired setting using the CH buttons and select it by pressing ENT button. TV Aspect : Only the center portion of 16:9 ratio D I S P L A Y... -
Page 40: Parental Lock Settings
PARENTAL LOCK SETTINGS Press SETUP button on the remote controller. Go to "Parental Lock" using the CH , Enter buttons. L O C K Rating 8(Adult) Password * * * * Go to a desired item using the CH buttons. Country Code Password Turn to setting rating level and password. -
Page 41: Setting Rating Level And Password
SETTING RATING LEVEL AND PASSWORD This is to prohibit the playing of specified DVDs which are unsuitable for children. Some DVD discs contain a restriction level which enables parents to remove scenes or prevent playback of discs by children. DVD players are equipped with a password designed to prevent children changing the level. -
Page 42: Reception Disturbance
RECEPTION DISTURBANCE The most common types of television interference are as follows : IGNITION NOISE: Black spots or horizontal lines may appear, picture may flutter or drift. Usually caused by interference from automobile ignition systems, neon lamps, electric drills and other electric appliances. GHOSTS : Ghosts are caused by the television signals following two paths. -
Page 43: Specifications
Wireless FM Broadcast Modulator Off + 4 Preset Frequencies + Any Frequency Between 88.3 MHz~90.3 MHz In 100 kHz Steps ACCESSORIES Unified Remote Controller (LSMD-121 + KEC Mobile Applications VCP's) AAA Cells X 2 R-Link Cable Supplied 12V DC Input Power Extension Cable Installation &...