Table of Contents
Advertisement
TV MENU BUTTON - OPERATIONS
(1) AUTO PROGRAM
This function allows automatic memorization of all active TV channels in your viewing area. Once
memorized, channels can be selected with the CHANNEL
the LSMD-104's Control Panel.
To activate AUTO PROGRAMMING.
Press the TV/Video button as necessary to switch to TV Mode.
Press the MENU Button until "AUTO PROGRAM" is selected.
Press the VOLUME button.
The following display will appear and the channel programming set-up procedure will begin automatically.
Auto Programming
CATV : 5
All possible channels will be rapidly scanned and all active channels will be memorized.
Note that very weak broadcast signals will not be memorized.
If you wish to stop the Auto Programming procedure before it is finished, press the VOLUME
(2) CCD
The LSMD-104 incorporates a Closed Caption Decoder (CCD) to enable viewing of CCD and TEXT
broadcasts.
CCD and TEXT information can only be viewed if they are being broadcat by a television station, or
recorded on a videotape or videodisc.
Press the MENU Button until "CCD" is selected.
Then press the VOLUME + button.
A display of CCD & TEXT channels will appear:
Press the VOLUME+ button repeatedly to select the desired CCD or TEXT mode.
You may also use the CCD button on the remote control to cycle through available modes:
Off
CCD1
+Exit
CCD :
Off
CCD 1
CCD 2
Text 1
Text 2
CCD2
TEXT1
19
/
buttons on the Remote Control or on
TEXT2
button.
Advertisement
Table of Contents
