Status Button - KEC LSMD-104 Installation Information & Operating Instructions

STATUS BUTTON

The STATUS button on the Remote Control lets you select between a CUSTOM adjustable picture
setting mode or any one of 3 factory preset picture modes.
Pressing the STATUS button repeatedly changes the mode as follows:
(1) CUSTOM mode
(2) STANDARD mode
(3) DYNAMIC mode
(4) MILD mode
MODE
Select this mode to view a picture that may be adjusted to your own
personal taste.
CUSTOM
Note: While picture adjustments may also be made in the other 3
modes, adjustments will only be stored in memory in CUSTOM mode.
Select this mode to restore picture adjustments to the normal factory-
STANDARD
preset mode.
Select this mode to view a strong and bright picture.
DYNAMIC This mode is intended especially for viewing in brighter (daylight)
environments.
Select this mode to view a milder picture.
MILD This mode is intended especially for viewing in darker (nighttime)
environments or to lessen eye fatigue.
PICTURE
24