Picture Button - KEC LSMD-104 Installation Information & Operating Instructions

PICTURE BUTTON

The PICTURE button allows you to select each picture adjustment element.
Press the PICTURE button on the Remote Control or on the LSMD-104 Control Panel to bring up
the PICTURE Menu.
Press the PICTURE button repeatedly to select the item you wish to adjust.
The selected item will change from WHITE to MAGENTA, indicating that it may be adjusted.
(1) CONTRAST adjustment mode
(2) BRIGHTNESS adjustment mode
(3) SHARPNESS adjustment mode
(4) COLOR adjustment mode
(5) TINT adjustment mode
After selecting the desired mode, press the VOLUME - / + buttons to adjust the picture as you prefer
according to the chart below.
VOLUME
LIGHT
DARK
SOFT
SUBDUED
REDDISH
When you are finished making adjustments, press the PICTURE button as many times as
necessary to remove the Picture Menu from the screen.
Example - Adjusting CONTRAST
Press the PICTURE button to display the PICTURE menu and select CONTRAST.
Press the VOLUME - / + buttons to call up and adjust the CONTRAST bar display.
Picture
Contrast 75
Brightness 50
Sharpness 50
Color 50
Tint 00
PIC. : Next + - : Adj
NOTES ON THE PICTURE FUNCTIONS:
Picture adjustments are only memorized if the STATUS Mode (see next section) is set to "CUSTOM".
Color LCD screens operate differently than conventional color picture tubes. As you operate the
picture controls, you will notice that the range of adjustment is somewhat less dramatic than would
occur with a conventional picture tube.
(6) NO DISPLAY
ITEM
-
CONTRAST
BRIGHTNESS
SHARPNESS
COLOR
TINT
23
VOLUME+
STRONG
BRIGHT
SHARP
VIVID
GREENISH
Contrast 75