Radio - Kenwood KMM-BT32U Instruction Manual

GETTING STARTED
F/W UPDATE
UPDATE SYSTEM / UPDATE BT
F/W UP xx.xx YES: Starts upgrading the
firmware. ; NO: Cancels (upgrading
is not activated).
For details on how to
update the firmware, see:
www.kenwood.com/cs/ce/
CLOCK
CLOCK DISPLAY ON: The clock time is shown on the
display even when the unit is turned
off. ; OFF: Cancels.

RADIO

Search for a station
1 Press repeatedly to select TUNER.
2 Press repeatedly (or press
Press S / T (or press S /
3
• To change the searching method for S / T: Press
AUTO1 : Automatically search for a station.
AUTO2 : Search for a preset station.
MANUAL : Manually search for a station.
• To store a station: Press and hold one of the number buttons (1 to 6).
• To select a stored station: Press one of the number buttons (1 to 6) (or press one of the number
buttons (1 to 6) on RC-406).
Direct Access Tuning (using RC-406)
1 Press DIRECT to enter Direct Access Tuning.
2 Press the number buttons to enter a frequency.
3 Press to search for a station.
• To cancel, press or DIRECT.
• If no operation is done for 10 seconds after step
Other settings
1
Press the volume knob to enter [FUNCTION].
2
Turn the volume knob to make a selection ( 6), then press the knob.
3 Repeat step 2 until the desired item is selected or activated.
4 Press and hold to exit.
To return to the previous setting item, press
/ on RC-406) to select FM1/ FM2/ FM3/ AM.
on RC-406) to search for a station.
repeatedly.
2
, Direct Access Tuning is automatically canceled.
.
5
ENGLISH