Digital Radio - Kenwood KMM-BT506DAB Instruction Manual

Getting Started
Change the crossover type
Press B SRC repeatedly to enter STANDBY.
1
2 Press and hold number buttons 4 and 5 to enter crossover select.
The current crossover type appears.
3
Turn the volume knob to select "2WAY" or "3WAY", then press the
knob.
4
Turn the volume knob to select "YES" or "NO", then press the knob.
The selected crossover type appears.
• To cancel, press and hold
• To adjust the selected crossover settings, see page 26.
CAUTION
Select a crossover type according to how the speakers are connected.
(Page 33, 34)
If you select a wrong type:
• The speakers may damage.
• The output sound level may be extremely high or low.
.

Digital Radio

About DAB (Digital Audio Broadcasting)
DAB is one of the digital radio broadcasting systems available today. It can
deliver digital quality sound without any annoying interference or signal
distortion. Furthermore, it can carry text, pictures and data.
In contrast to FM broadcast, where each program is transmitted on its own
frequency, DAB combines several programs (called "services") to form one
"ensemble."
The "primary component" (main radio station) is sometimes accompanied
by a "secondary component" which can contain extra programs or other
information.
Preparation:
1
Connect the DAB antenna (supplied/separately purchased) to the
DAB antenna jack. (Page 34)
2 Press B SRC repeatedly to select DIGITAL AUDIO.
3
Press and hold (LIST UPDATE) to start the Service List update.
"LIST UPDATE" appears and update starts. "UPDATED" appears when
update completes.
Updates take up to 3 minutes. No interruption (such as traffic
information) is possible during updates.
• To cancel the Service List update: Press and hold
again.
(LIST UPDATE)
7
ENGLISH