8
Clone configuration
8�1
From Cloning to TV
Copy TV configuration data from a USB stick
to TV.
1.
Insert the USB stick to the USB connector
at the side of the TV.
2.
Enter
Setup menu.
3.
Press
ï to select Cloning to TV.
4.
Press
Æ to enter Cloning to TV.
5.
Press
Æ to load data to the TV.
During this process, the cloning files.
Setup menu
Clock
Auto scart
USB break-in
Monitor out
Blank current Channel
Store - go right
Cloning to TV
TV to Cloning
Note
D
• During the process of copying, do not
remove the USB stick.
• All remote control command and
control buttons on the TV are disabled.
6.
Switch off and then on to reset the TV
after cloning.
8�2
From TV to Cloning
Copy TV configuration data from TV to USB
stick.
1.
Enter
Setup menu.
2.
Press
ï to select TV to Cloning.
3.
Press
Æ to enter TV to Cloning.
4.
Press
Æ to load data to the USB stick.
Cloning to TV
Load
Done
Setup menu
Clock
Auto scart
USB break-in
Monitor out
Blank current Channel
Store - go right
Cloning to TV
TV to Cloning
Note
D
• During the process of copying, do not
remove the USB stick.
• All remote control command and
control buttons on the TV are disabled.
5.
Switch off and then on to reset the TV
after cloning.
TV to Cloning
Load
Done
EN-23