Clone - Philips HFL5009D Series Installation Manual

9. Clone

With cloning it is possible to copy to/from a USB device TV the configuration data, media content and the channel
list data. Place a USB Memory stick in the USB side connector of the TV.
*The USB device should be formatted as FAT or FAT32.
Access the Professional menu by pressing the "RC5 SETUP" key, and then press the "Home/Menu" button. With the
guest remote control, press the following keys in sequence: "3,1,9,7,5,3,MUTE". Access the [Professional settings]
menu and go to [Clone/Upgrade]:
To clone all the settings from the TV, the option [Clone to USB] should be used.
1. Select [Clone to USB] and press "OK".
2. The clone data will be loaded from the TV set into USB device.
3. Wait until the OSD message returns to its earlier state before removing the USB device
To clone all settings from the USB to the TV, the option [Clone to TV] should be used.
1. Select [Clone to TV] and press "OK".
2. The clone data will be loaded from the USB device into the TV. To activate the loaded settings, TV will
restart. After restart TV will display the Professional menu overview.
3. Remove the inserted USB drive.
All manuals and user guides at all-guides.com
54