Product Information - Philips CEM250/55 User Manual

10 Product
information
Note
•
Product information is subject to change without prior
notice.
Power supply
Fuse
Suitable speaker
impedance
Maximum power
output
Continuous power
output
Pre-Amp output
voltage
Subwoofer output
voltage
Aux-in level
Dimensions (W x H
x D)
Weight
Radio
28 EN
CEM250-55-IFU-ENG.indd CEM250-55-IFU-ENG.indd 28 28
12 V DC (11 V - 16 V),
negative ground
15 A
4 - 8
50 W x 4 channels
24 W x 4 channels (4
10% T.H.D.)
2.0 V ( USB play mode;
1 kHz, 0 dB, 10 k
load)
2.0 V (USB play mode:
61 Hz, 0 dB, 10 k
load)
500 mV
188 x 58 x 190 mm
1.0 kg
Frequency range 87.5 - 108.0 MHz
- FM (Europe)
87.5 - 107.9 MHz
(American)
Frequency range 522 - 1620 KHz (Europe)
- AM(MW) 530 - 1710 HKz
(American)
Usable sensitivity 8 dBu
- FM
Usable sensitivity 3.2 dBu
- AM(MW) (S/N =
20 dB)
Frequency 20 Hz - 20 KHz
response
Stereo separation 30 db (1 kHz)
Signal/noise ratio >75 dB
Compatible USB devices:
• USB fl ash memory (USB 2.0 or
USB1.1)
• USB fl ash players (USB 2.0 or USB1.1)
• memory cards
Supported formats:
• USB or memory fi le format FAT12,
FAT16, FAT32 (sector size: 512 bytes)
• MP3 bit rate (data rate): 32-320 Kbps
and variable bit rate
• WMA v9 or earlier
• Directory nesting up to a maximum
of 8 levels
• Number of albums/ folders: maximum
255
• Number of tracks/titles: maximum 999
• ID3 tag v2.0 or later
• File name in Unicode UTF8
(maximum length: 128 bytes)
Unsupported formats:
• Empty albums: an empty album is an
album that does not contain MP3/
WMA fi les, and is not be shown in the
display.
• Unsupported fi le formats are skipped.
For example, Word documents (.doc)
or MP3 fi les with extension .dlf are
ignored and not played.
2008-10-28 2008-10-28 10:28:27 10:28:27