Advertisement
From the screen shown on the previous page, use the DIRECTION buttons to move the cursor to the
right side of the display so the Information Center Display looks like this:
The box to the right of "MODE" should be highlighted.
KNOB / SLIDER MODE
This Parameter allows you to adjust how a value is affected when a Rotary Control or slider is moved. The
data chart below shows the options you may select.
Parameter
Mom
When a Rotary Control or slider is moved, the value will change immediately.
Across
When a Rotary Control or slider is moved the value will not change until the current value is
arrived at by the movement of the Rotary Control or slider, at which point the value will change.
Turn the VALUE knob to make your selection.
From the above screen, press the DIRECTION " " button once.
The box to the right of "ALLOCATE" should be highlighted.
3PART ORGAN
This Parameter allows you to select how the 3PART ORGAN button interacts with the ORGAN ALLOCATE
button. The data chart below shows the options you may select.
Parameter
No
The 3PART ORGAN button has no effect on the ORGAN ALLOCATE button.
All On
When the 3PART ORGAN button is turned "ON," all ORGAN Parts turn "ON," the SPLIT button turns
"ON" and other Voice Sections are turned "OFF." Use this setting to allow 3PART ORGAN to
convert the SK PRO into a vintage Hammond Organ with two manuals and pedals instantly.
Turn the VALUE knob to make your selection.
KNOB / SLIDER MOD Options
Description
3PART ORGAN ALLOCATE Options
Description
Special Performance Features
31
Advertisement
