Advertisement
CALIBRATE (POLARITY)
This Parameter allows you to configure the polarity of a Damper Pedal to work properly with the SK PRO.
To calibrate a Damper Pedal for the SK PRO, do the following:
NOTE: Do not press the Damper Pedal while performing this operation.
1.
With the DAMPER FUNCTION Mode Page displaying, press the DIRECTION " " button
repeatedly until the box, "CALIBRATE" is highlighted:
2.
Press the ENTER button. You will see the following message in the display for approximately
½ second:
After the above message disappears, the connected Damper Pedal is set to work properly with
the SK PRO.
Special Performance Features
21
Advertisement
