Battery Cables Installation - LEGRAND Keor Mod Installation Manual

4. Installation

4.2.4 Battery cables installation

Check the following before the installation:
- install the battery cables before adding the battery drawers to the cabinet.
- no voltage must be present.
- the earthing cable must be properly connected (see paragraph 4.2.2).
If no change is required, follow these steps:
- crimp the positive, negative, and neutral battery cables with M10 eyelets for the modular battery cabinet connection.
- connect the positive cable of the battery cabinet to the + BATT thread using a M10 flat washer and a M10 grower washer.
The grower washer must always be put on top of the flat washer.
- connect the negative cable of the battery cabinet to the - BATT thread using a M10 flat washer and a M10 grower washer.
The grower washer must always be put on top of the flat washer.
24