Advertisement
Mount in the dashboard 6
1
If the car does not have an on-board drive or
navigation computer, disconnect the negative
terminal of the car battery.
•
If you disconnect the car battery in a car
that has an on-board drive or navigation
computer, the computer may lose its
memory.
•
If the car battery is not disconnected,
to avoid short-circuit, ensure that bare
wires do not touch each other.
2
Remove the two screws on the top of the
unit.
3
Remove the mounting sleeve with the sup-
plied disassembly tools.
4
Install the sleeve into the dashboard and
bend the tabs outward to fix the sleeve.
5
Place the supplied rubber cushion over the
end of the mounting bolt.
6
Slide the unit into the dashboard until you
hear a click sound.
7
Reconnect the negative terminal of the car
battery.
Attach the front panel 6
1
Attach the trim plate.
2
Insert the right side of the panel in the chas-
sis until it is correctly engaged.
3
Press the left side of the panel until the
mechanism locks it into place.
Turn on
1
Press
to turn on the unit.
•
To turn off the unit, press
for over 3
seconds.
Set clock
1
Press MENU.
2
Press
or
repeatedly until currently time
is displayed.
3
Turn
clockwise to set hour.
4
Press
to confirm.
5
Turn
anti-clockwise to set minute.
6
Press
to confirm.
View clock
1
Press and hold OPTIONS repeatedly until
the clock is displayed.
Listen to radio
1
Press SOURCE repeatedly to select Tuner.
2
to select band: [FM1], [FM2],
Press
or
[FM3], [AM1], or [AM2] .
3
Press
or
to tune to a radio station
manually.
•
The radio station is broadcast.
•
To search for a radio station automati-
cally, press
or
for over 3 seconds.
Advertisement
