Audio Adjustment; Setting The Clock - Philips RC369 User Manual

AUDIO ADJUSTMENT
Csounce ]] i] sano _)
e POWER : Press Power key to switch the set
on or off.
¢ VOLUME : Press —- key or + key to adjust the
volume.
Please make sure you can still hear the traffic
(horns, sirens........ )
e SOUND: Choose one of the predefined sound
styles with the SOUND key.
~ BASS-TRE : Your own settings of bass and
treble.
~ FLAT : Mid-positions of bass and treble
— JAZZ: Jazz music
~ VOCAL: Speech
— CLASSIC : Classic music
~ ROCK : Rock music
® SELECT: Choose the desired audio mode with
SELECT key.
- BASS (low notes), TREBLE (high notes),
BALANCE (left-right), FADER (rear-front).
- Press - key or + key to adjust the selected
audio mode. Adjustment of Bass, Treble and
Loudness settings only applicable when
'BASS-TRE' is selected as the sound style.
Note: After 5 seconds the display goes back
to the last mode of operation.
¢ LOUD :To reinforce bass and treble especially
when listening at a low volume level. Press
the LOUD key at least 2 seconds (until you hear
a beep) to switch loudness on or off.
e MUTE: Press the MUTE key for at least 2
seconds to mute the sound momentarily.
Press any key to restore the same volume
ievel.
Note: The silent period may be interrupted by
traffic announcements (if TA/NEWS is
switched on).
¢ SOURCE : Briefly press the SOURCE key to
select the desired source. The display shows:
RADIO, TAPE or CHANGER * (AUX *).
* only for certain versions
SETTINGTHECLOCK*
USEFUL TIPS
| Gari / SCAN
| sano _)
(ees) (=p) GI=Ts)
Press INIT key for at least 2 seconds (until you
hear a beep) to enter the Initialisation mode.
Display shows 'INIT".
Press € or P key to select option 'TIME'.
Press AST key to select '12H' or '24H'.
Press P key:
Display shows e.g. '00:00' (24 hour fomat) or
'AM 12:00' (12 hour format).
Hour digit start flashing.
Press AST key to adjust Hour digit.
Press ® key again:
Minute digit start flashing.
Press AST key to adjust Minute digit.
Press INIT key for at least 2 seconds (until your
hear a beep) to leave the Initialisation mode.
10 seconds after any key operations, the display
will always shows time when clock mode is
activated.
You can Pherae the colour ioe the displa
» ses INITIAL SETTING 35
ay before ee the volume.