Clutch Lever - Yamaha FJR1300AE Owner's Manual

The throttle grip must be completely
closed in order to change the drive mo-
de.
The selected mode is shown on the
drive mode display. (See page 4-9.)
The drive mode cannot be changed
while the cruise control system is oper-
ating.
Instrument and control functions

Clutch lever

1. Clutch lever
2. Clutch lever position adjusting dial
3. Match mark
4. Distance
The clutch lever is located on the left
side of the handlebar. Pull the clutch
lever to disengage the engine from the
drivetrain. Release the lever to engage
the clutch and transmit power to the
rear wheel.
TIP
The position of the clutch lever can be
adjusted. To adjust the distance be-
tween the clutch lever and the handle-
bar, gently push the lever away from
the handlebar and rotate the position
adjusting dial.
TIP
Make sure the setting number on the
position adjusting dial aligns with the
match mark.
4-22
1
4
 The lever should be pulled rapidly
and released slowly for smooth
shifting. (See page 6-3.)
 The clutch lever is equipped with a
switch, which is part of the ignition
circuit cut-off system. (See page
4-44.)
EAU12833
2
3
4