Yamaha FJR1300AE Owner's Manual page 59

TIP
The damping force setting can be set to
7 levels (+3, +2, +1, 0, –1, –2 and –3).
"+3" is the hardest level and "–3" is the
softest level.
6. Push the menu switch.
If the vehicle moves while you are ad-
justing the damping force, the informa-
tion display will change to the display
mode.
GEAR
N
HARD
+3
1. Damping force adjusting function
2. Damping force setting
3. Preload setting pictogram
WARNING
The rear shock absorber assembly
contains highly pressurized nitrogen
gas. Read and understand the fol-
lowing information before handling
the shock absorber assembly.
 Do not tamper with or attempt
to open the cylinder assembly.
 Do not subject the shock ab-
sorber assembly to an open
flame or other high heat source.
This may cause the unit to ex-
plode due to excessive gas
pressure.
Instrument and control functions
GEAR
1 1
HARD
2
+3
3
EWA16421
4-42
 Do not deform or damage the
cylinder in any way. Cylinder
damage will result in poor
damping performance.
 Do not dispose of a damaged or
worn-out shock absorber as-
sembly yourself. Take the shock
absorber assembly to a Yamaha
dealer for any service.
4