Yamaha FJR1300AE Owner's Manual page 43

Turning traction control system off
or on
1
1. "TCS" button
2. Engine trouble warning light "
3. Traction control system indicator light "
When the vehicle is turned on, the trac-
tion control system automatically turns
on.
To turn off the traction control system,
stop the vehicle and push the "TCS"
button for 2 seconds. The traction con-
trol system indicator light will come on.
To turn traction control back on, push
the "TCS" button again. The traction
control system indicator light will turn
off.
TIP
Turn off traction control to help free the
rear wheel if stuck in mud, sand, or
other situation.
Notes on usage
The traction control system will disable
if:
 either
wheel
ground.
 excessive rear wheel spin is de-
tected.
 either wheel is forcibly rotated
(such as when performing mainte-
nance).
Instrument and control functions
2 3
"
"
comes off the
4-26
TIP
If the traction control system is dis-
abled, both the traction control system
indicator light and the engine trouble
warning light will come on.
NOTICE
Use only the specified tires. (See
page 7-21.) Using different sized
tires will prevent the traction control
system from controlling tire rotation
accurately.
To reset the traction control system
1. Turn the vehicle off and wait a few
seconds.
2. Turn the vehicle on and start the
engine.
3. After traveling at least 20 km/h (12
mph), the traction control system
indicator light should turn off and
the system be enabled.
4. Have a Yamaha dealer check the
vehicle and turn off the engine
trouble warning light.
TIP
If the traction control system indicator
light or engine trouble warning light re-
main on after resetting, ride cautiously
and have a Yamaha dealer check the
vehicle as soon as possible.
ECA16801
4