Xo 4 Manual
Retrofit of quick connectors
Hide thumbs
Also See for 4:
- Troubleshooting manual (88 pages) ,
- User manual (30 pages) ,
- Manual (14 pages)
Subscribe to Our Youtube Channel
Related Manuals for Xo 4
Summary of Contents for Xo 4
- Page 1 4/ XO FLEX ® RETROFIT OF QUICK CONNECTORS YB-672 Version 1.10 XO CARE A/S Usserød Mølle Håndværkersvinget 6 +45 70 20 55 11 DK 2970 Hørsholm info@xo-care.com Denmark www.xo-care.com...
- Page 2 XO CARE A/S YB-672 Ver 1.10 Page 2 of 6...
- Page 3 WARNING: When making changes and handling electronics in the XO 4 Unit – always use ESD antistatic wristband (UC-600). Tools: Torx 20 Hose Cutter Remove the 4 torx20 screws and remove the panel on the service hatch. XO CARE A/S YB-672 Ver 1.10...
- Page 4 Connect the supplied 4mm air and water hose to the quick connectors. Top (Blue): Air Bottom (White): Water Route the 4mm water and air hose as illustrated. XO CARE A/S YB-672 Ver 1.10 Page 4 of 6...
- Page 5 T-connector on the water regulator. Cut the 4mm air hose to desired length, and connect the air hose to the air regulator as illustrated. XO CARE A/S YB-672 Ver 1.10 Page 5 of 6...
- Page 6 Be sure to remove the couplings before switching on the unit. Switch on the unit and test the newly installed product. Check that there are no leaks and that the system functions properly. XO CARE A/S YB-672 Ver 1.10 Page 6 of 6...
Need help?
Do you have a question about the 4 and is the answer not in the manual?
Questions and answers