Freestyle Shark Classic Quick Start Manual

TRIM
All manuals and user guides at all-guides.com
SHARK CLASSIC
FEATURES:
• CURRENT TIME
• DAY/MONTH/DATE
• TWO DAILY ALARM
• HOURLY CHIME
• STOPWATCH
• OPTIONAL 24-HR. TIME
• WATER RESISTANT TO
300FT/100M
• NIGHT VISION™
BACK LIGHT
KEY TO SYMBOLS
LIGHT
S3
INTRODUCTION
Congratulations on your purchasing
the Easy-Set Watch II. Designed for
easy operation, the watch
automatically tells you which button
to use in a setting procedure. The
watch has the following functions:
• Real-time calendar clock for home
time
• Second calendar clock for foreign
time
• Dual daily alarms and hourly
chimes
• Stopwatch with split function
• 10 preset countdown timers
The watch is also equipped with an EL
back light to facilitate time reading at
night or in dim light.
HOW TO USE THE BACK LIGHT
Press the LIGHT button once to turn
on the back light for three seconds.
DISPLAY MODES
The watch has four display modes:
home time (TIME), home time alarm
(ALM1), stopwatch (STW) and
countdown timer (TMR).
To change from one display mode to
another, press the S3 button once. The
mode description will appear for two
seconds before activating the selected
mode.
HOME AND FOREIGN DISPLAY
To display the foreign time, press S2
when the home time is displayed. The
mode description (TM-2) will appear
shortly before the foreign time is
displayed. To change back to the home
time, press S2.
To display the daily alarm for foreign
time, press S2 when the daily alarm
for home time is displayed. The mode
description (ALM 2) will appear shortly
before the foreign time alarm is
displayed.
HOW TO SET THE TIME AND
DATE
1 Select time display using the S3
S1
button.
2 Select home time or foreign time
using the S2 button.
S2 3 Hold the S2 button for two seconds.
The SET message will appear
momentarily. The second digits
will blink.
4 Press the S1 button to reset the
second digits to 00.
5 Press the S3 button. The minute
digits will blink.
6 Use the S1 button to set the
minutes. Press the button once to
increase the digits by one unit or
speed up the process by holding
down the button.
7 Press the S3 button. The hour
digits will blink.
8 Use the S1 button to set the hours.
9 Follow the same pattern to set the
day-of-the-month,month, day-of-
the-week, hour format and date
format.For the hour format, you
can choose 12-hour display with
P indicator or 24-hour display. As
for the date format, you can choose
M-D (month-day) or D-M (day-
month). The chosen formats will
apply to both home and foreign
settings.
10 Press the S2 button to confirm the
settings and return to current time
display.
HOW TO DISPLAY THE DATE
To display the date, press S1 when the
time is displayed. Press the button
again to go back to time display. The
watch will also do so automatically
after six seconds.
HOW TO SET THE DAILY ALARMS
1 Select alarm function using the S3
button.
2 Select home and foreign time alarm
using the S2 button.
3 Hold the S2 button for two seconds.
The SET message will appear. The
minute digits will blink.
4 Use the S1 button to set the
minutes.
5 Press the S3 button. The hour digits
will blink.
6 Use the S1 button to set the hours.
7 Press the S2 button to confirm and
exit.
HOW TO USE THE DAILY ALARMS
AND HOURLY CHIMES
To display the alarm time, select ALM
1 or ALM 2 mode using the S2 button
in alarm mode.
Use the S1 button to set the status of
the alarm and chime functions of the
chosen alarm. Press the button once
to activate the daily alarm. Press the
button again to activate the hourly
chime. Press the button a third time
to activate both functions. To deactivate
both, press the S1 button a fourth time.
The chime and alarm indicators will
appear when their respective functions
are active.
WHEN AN ALARM OR HOURLY
CHIME GOES OFF
A tune will go off by the hour if the
hourly chime function is activated and
a 20-second alarm tune will be emitted
at the designated time when the alarm
is active. To stop either tune, press any
button.
To disable the functions, select ALM 1
or ALM 2 and use S1 button to turn off
the indicator of the function as desired.
HOW TO USE THE STOPWATCH
For a straight forward count-up,
1 Select stopwatch mode using the
S3 button. The last recorded time
of the stopwatch will be
displayed.Press the S2 button to
clear the old record.