Freestyle Shark Classic MID How To Use

SHARK
CLASSIC MID
FEATURES:
• CURRENT TIME
• DAY/MONTH/DATE
• TWO DAILY ALARM
• HOURLY CHIME
• STOPWATCH
• OPTIONAL 24-HR. TIME
• WATER RESISTANT TO
300FT/100M
• NIGHT VISION™
BACK LIGHT
KEY TO SYMBOLS
LIGHT
S3
INTRODUCTION
Congratulations on your purchasing
the Easy-Set Watch II. Designed for
easy operation, the watch
automatically tells you which button
to use in a setting procedure. The
watch has the following functions:
• Real-time calendar clock for home
time
• Second calendar clock for foreign
time
• Dual daily alarms and hourly
chimes
• Stopwatch with split function
• 10 preset countdown timers
The watch is also equipped with an EL
back light to facilitate time reading at
night or in dim light.
HOW TO USE THE BACK LIGHT
Press the LIGHT button once to turn
on the back light for three seconds.
DISPLAY MODES
The watch has four display modes:
TRIM
home time (TIME), home time alarm HOW TO DISPLAY THE DATE
(ALM1), stopwatch (STW) and
To display the date, press S1 when the
countdown timer (TMR).
time is displayed. Press the button
To change from one display mode to again to go back to time display. The
watch will also do so automatically
another, press the S3 button once. The
after six seconds.
mode description will appear for two
seconds before activating the selected
mode.
HOW TO SET THE DAILY ALARMS
1 Select alarm function using the S3
HOME AND FOREIGN DISPLAY
button.
To display the foreign time, press S2
2 Select home and foreign time alarm
when the home time is displayed. The using the S2 button.
mode description (TM-2) will appear
3 Hold the S2 button for two seconds.
shortly before the foreign time is
The SET message will appear. The
displayed. To change back to the home
minute digits will blink.
time, press S2.
4 Use the S1 button to set the
To display the daily alarm for foreign
minutes.
time, press S2 when the daily alarm
5 Press the S3 button. The hour digits
for home time is displayed. The mode
will blink.
description (ALM 2) will appear shortly
before the foreign time alarm is
6 Use the S1 button to set the hours.
displayed.
7 Press the S2 button to confirm and
exit.
HOW TO SET THE TIME AND
DATE HOW TO USE THE DAILY ALARMS
1 Select time display using the S3 AND HOURLY CHIMES
button.
To display the alarm time, select ALM
S1
1 or ALM 2 mode using the S2 button
2 Select home time or foreign time
in alarm mode.
using the S2 button.
Use the S1 button to set the status of
3 Hold the S2 button for two seconds.
the alarm and chime functions of the
The SET message will appear
S2
chosen alarm. Press the button once
momentarily. The second digits
to activate the daily alarm. Press the
will blink.
button again to activate the hourly
4 Press the S1 button to reset the
chime. Press the button a third time
second digits to 00.
to activate both functions. To deactivate
5 Press the S3 button. The minute
both, press the S1 button a fourth time.
digits will blink.
The chime and alarm indicators will
6 Use the S1 button to set the
appear when their respective functions
minutes. Press the button once to
are active.
increase the digits by one unit or
speed up the process by holding
WHEN AN ALARM OR HOURLY
down the button.
CHIME GOES OFF
7 Press the S3 button. The hour
A tune will go off by the hour if the
digits will blink.
hourly chime function is activated and
8 Use the S1 button to set the hours.
a 20-second alarm tune will be emitted
at the designated time when the alarm
9 Follow the same pattern to set the
is active. To stop either tune, press any
day-of-the-month,month, day-of-
button.
the-week, hour format and date
format.For the hour format, you
To disable the functions, select ALM 1
can choose 12-hour display with
or ALM 2 and use S1 button to turn off
P indicator or 24-hour display. As
the indicator of the function as desired.
for the date format, you can choose
M-D (month-day) or D-M (day-
HOW TO USE THE STOPWATCH
month). The chosen formats will
For a straight forward count-up,
apply to both home and foreign
settings.
1 Select stopwatch mode using the
10 Press the S2 button to confirm the S3 button. The last recorded time
of the stopwatch will be
settings and return to current time
displayed.Press the S2 button to
display.
clear the old record.
2 Press the S1 button once to start
the stopwatch. The watch will start
counting from 00'00''00 if the
FOLLOW THESE 8 TIPS TO GET THE
watch is cleared. Otherwise, it will
pick up from where it last left off. MOST OUT OF YOUR NEW WATCH!
The watch will count up to 59
minutes and 59.99 seconds before
starting from zero again.
1. Never Pull out the crown or operate
3 To stop counting, press the S1 the pushers/buttons under water.
button once. Press the button
2. Make sure your crown is returned
again to resume from where it left
to the original position before you
off. To clear the stopwatch, press
expose your watch to water.
the S1 button to stop counting and
then press the S2 button. 3. If your watch is exposed to
saltwater it is very important to
The stopwatch is equipped with a split
wash it thoroughly under tap water
function for you to keep track of
and wipe dry with a soft cloth.
individual lap time. To use the function,
Keep it clean!
1 While the stopwatch is running,
press the S2 button once whenever 4. Sever impacts or drops may affect
your watches water resistance
you want to register a lap. The
and performance.
stopwatch is still running in the
background. To display the
5. Avoid exposing your Freestyle
currently accumulated time, press
watch to extreme temperatures
the S2 button.
such as in a hot shower, Jacuzzi,
2 Repeat the last step until you have
sauna or hot tub. The combination
registered all the laps.
of extreme heat and water may
cause your watch to lose some of
3 Press S1 to stop counting. Press
its water resistance.
the button again to resume or
press the S2 button to clear.
6. Avoid exposing your watch to
Note: You can leave the stopwatch chemicals, soaps or solvents as
running while switching over to other they deteriorate the water resist
operating modes. The STW indicator
seals in your watch.
will light up as a reminder.
7. Never try to remove the caseback,
leave this to a certified watch repair
HOW TO USE THE TIMER
technician or Freestyle service
To set the count down time,
center. This will help in preventing
1 Select timer mode using the S3 water leakage from improper
button. The last selected timer battery replacement.
setting will be displayed.
8. It is advisable to have your watch
2 Use the S2 button to alter the
pressure tested annually and to
setting. You can select among 1,
re-furbish your watch every 2-3
3, 5, 10, 15, 20, 25, 30, 45 and 60
years to extend the life of the watch.
minutes.
To start a countdown, press the S1
button. Press the button again to stop
the countdown or a third time to
resume from where it left off.
After reaching zero on a countdown,
a 20-second beep will go off. To stop
the beeping, press any button. The
timer will reload automatically.
BATTERY INFORMATION
The watch uses a 3.0V lithium button
cell battery, which in normal
circumstances will be good for 1-2
years. However, the battery life will
vary due to shelf time and the manner
the watch is used.
LIMITED LIFETIME WARRANTY
Freestyle U.S.A. warrants, to the
original purchaser, that its watches
are free from defects in materials
and workmanship for the lifetime
of the watch (under normal use)
from date of original purchase.
The following are not covered under
warranty: battery, strap/bracelet/
band and crystal.
Accidental breakage or damage
due to normal wear or misuse of
the product, including but not limited
to the mathematical accuracy of
the product, is not covered under
this warranty. Some states do not
allow limitations on how long an
implied warranty lasts, or the
exclusions of or limitations on
consequential damages, so the
above limitation may not apply to
you. This warranty gives you
specific legal rights, and you may
have other rights, which vary from
state to state.
Under this warranty FREESTYLE
will make any necessary repairs, if
applicable, at no cost to you the
consumer. Any repair needed that
is not under warranty will be at the
cost of you the consumer. Proof
of purchase and / or original receipt
it needed to validate your warranty.
Your warranty is voided by any
servicing out by a non-authorized
agent. Any other form of guarantee
to you by the retailer is his / her
responsibility. This warranty applies
to watches purchased in the United
States. For watches purchased
outside the United States, please
contact you authorized
FREESTYLE dealer for warranty
information.