Copying From Digital Equipment (Dubbing) - Panasonic AG-DV1DC E Operating Instructions Manual

Recording Features
Copying from Digital
Equipment (dubbing)
High quality digital-to-digital copying can be
accomplished if this unit and a Palmcorder
incorporate the DV Input/Output Connector
(DV Interface cable is not supplied).
Source (Playing)
unit
DV Interface
Cable
7
8
REC
PAUSE
9
STOP
24
-English-
DV Input/Output
Connector
Recording
unit
3
4, 5
MENU
SET
4, 5
+/–
Before you begin
• Connect this unit and a source
(Playing) unit to their power sources.
• Connect this unit and a source
(Playing) unit using the DV Interface
cable (4-pin to 4-pin).
• Turn both units on.
1
Insert a pre-recorded tape into the
source (playing) unit, and set POWER
to VCR.
2
Insert a blank tape with the record
tab closed into the target (recording)
unit and set POWER to ON.
3
Press MENU to display MAIN MENU
screen.
4
Press +/– to select
press SET to display the REC MODE
menu screen.
5
Press +/– to select
press SET to set to OUT/PHONES.
• "DV IN" is displayed on the LCD
monitor. (p. 32)
6
Press (PLAY) on the source
(Playing) unit. When the tape reaches
the point from which you want to start
dubbing, press
7
First place the target (recording) unit
to play pause mode and then press
(REC) to pause the tape at
the starting point of the dub.
8
Simultaneously, press
both units to begin dubbing.
9
Press (STOP) on the recording
unit, and then press
playing unit to end dubbing.
CAUTION:
Unauthorised exchanging and/or
copying of copyrighted recordings may
be copyright infringement.
REC MODE , then
AV JACK , then
(PAUSE).
(PAUSE) on
(STOP) on the