Set Time And Date; Switch To Standby; Adjust Volume - Philips DC315/37 User Manual

Set time and date

1
In standby mode, press and hold TIME SET/AUTO SCAN for 2
seconds.
The hour digits are displayed and begin to blink.
»
2
Press TUNING +/- to set the hour.
3
Press TIME SET/AUTO SCAN to confirm.
The minute digits are displayed and begin to blink.
»
4
Repeat steps 2-3 to set the minute, year, month, day and 12/24 hour
format.
Turn on
1
Press POWER.
The unit switches to the last selected source.
»

Switch to standby

1
Press POWER again to switch the unit to standby mode.
The time and date (if set) appear on the display panel.
»
Tip
•
After being idled for 15 minutes in standby mode, the screen turns
dim automatically.
•
To light up the screen, press any button.

Adjust volume

1
During play, press VOL +/- to increase/decrease the volume.