Advertisement
Installation
(1) TIME SET switch:
-
TIME - for setting the time
-
RUN - normal position
-
ALARM - for setting the alarmtime
@) ALARM switch:
—
OFF - alarm off
-
RADIO - for waking up by radio
—
BUZZER - for waking up by buzzer
(3) HOUR button - for setting the hours
(5) MIN button - for setting the minutes
-
To switch off alarm temporarily
—
To switch off the radio
(8) BATTERY DOOR
(3, VOLUME control - for adjusting the volume
4) BAND switch - for selecting wavebands
MAINS CONNECTION
If it does not, consult your dealer or service
organisation.
e To disconnect the set from the mains
completely, withdraw the mains plug frorn the
wall socket.
For users in the UK: Please follow the
instructions on page 6.
Radio/ Clock
RADIO
—
—
—
RADIO ON
You can use this clock radio solely as a radio
e Set the TIME SET switch 1: to RUN.
e Locate the required transmitter using the
TUNING dial «o.
RADIO OFF
time (59 minutes) has elapsed:
Aerials
— For FM reception there is an aerial wire at the
rear of the clock radio. This wire must be
extended and, if necessary adjusted slightly, in
order to obtain good reception.
- The AM aerial is built into the clock radio. To
obtain optimum reception you may have to
adjust the position of the clock radio slightly
CLOCK
Clock display
Adjusting the time
e Set the TIME SET switch (1) to TIME
e Set the correct time using the HOUR (3: and
MINUTE (57 outtons.
Advertisement
