Table of Contents Disclaimer Scope of Delivery Safety Instructions Introduction Part I Installation Part II Unpacking your SRG Raingauge ........................7 Choosing the Site ............................. 8 Placing the Gauge ............................8 Operation Part III Maintenance Part IV Repair Part V...
HyQuest Solutions or KISTERS AG. Other product documentation and the information contained in it, names used may or may not be the trademarks of even if HyQuest Solutions has been advised of the their respective owners. possibility of such damages.
Before starting to work, you have to check the functioning and integrity of the system. § Check for visible defects on the SRG, this may or may not include any or all of the following mounting facilities, connectors and connections, mechanical parts, internal or external communication devices, power supplies or power supply lines, etc.
The HyQuest Solutions Standard Rain Gauge model SRG is recognised as the standard for non recording type rain gauges. The SRG is fully constructed from aluminium except for the rain measure which is made from durable plastic and has a capacity of 20 mm of rainfall.
Placing the Gauge Unpacking your SRG Raingauge Please verify that you have received the items listed in the Scope of Delivery. To prepare the SRG for installation: § Lift the unit from the carton and place on secure surface. §...
In rare cases, a product may not be delivered in accordance with your order. In such cases HyQuest Solutions’ return and repair policy applies. For you as a customer, this means the following: 1. Contact HyQuest Solutions using the Repair Request Form made available online: https://www.hyquestsolutions.eu/fileadmin/Form/Telemetry_Solution_app.jpg.pdf...
Page 13
Obligations of the Operator and Disposal EU WEEE Directive As players in the environmental market, KISTERS AG and HyQuest Solutions are committed to supporting efforts to avoid and recycle waste. Please consider: Avoidance before recycling! Recycling before disposal! This symbol indicates that the scrapping of the unit must be carried out in accordance with Directive 2012/19/EU.
Need help?
Do you have a question about the SRG and is the answer not in the manual?
Questions and answers