Specific Safety Rules - RADLEY 1281-859 Owner's Manual

SPECIFIC SAFETY RULES

WARNING: Know your oscillating tool. Do not plug the tool into the power
source until you have read and understand this Instruction Manual. Learn
the tool's applications and limitations, as well as the specific potential
hazards related to this tool. Following this rule will reduce the risk of
electric shock, fire, or serious injury.
WEAR CSA
APPROVED
EYE PROTECTION
goggles (not glasses) that comply with ANSI safety standard Z87.1. Everyday
glasses have only impact resistant lenses. They ARE NOT safety glasses.
WARNING: Glasses or goggles not in compliance with ANSI Z87.1 could
cause serious injury when they break.
Always keep hands out of the path of the saw blade. Avoid awkward hand
positions where a sudden slip could cause your hand to move into the path of
the saw blade.
Secure workpiece. Use clamps or a vice to hold the workpiece. It is safer than
using your hand and it frees both hands to operate the tool.
Make sure there are no nails or foreign objects in the part of the workpiece to
be cut or sanded.
To avoid injury from accidental starting, always remove the plug from the
power source before installing or removing an accessory.
Never use dull blades in the tool. They will cut slower, leave rough cuts and
break easily due to added pressure and excessive heat. They will also overload
the motor and cause premature failure of the tool.
Never use damaged or bent blades. They will be brittle and break easily possi-
bly causing injury to the operator.
Never touch a saw blade immediately after using the tool. The blade will be
extremely hot and will burn your hand.
Only use accessories designed for use with this tool.
7
Oscillating multi tool - Owner's Manual
Always wear eye protection. Any power tool can
throw foreign objects into your eyes and cause
permanent eye damage. ALWAYS wear safety