Installing Sandpaper; On/Off Switch - RADLEY 1281-859 Owner's Manual

1281-859
ASSEMBLY AND OPERATING

INSTALLING SANDPAPER

1. Install the hook & loop sanding pad (1)
onto the tool (Fig. 2).
2. Firmly press the sandpaper (2) onto
the hook & loop pad.
NOTE: Press the sandpaper firmly onto
the hook & loop pad.
3. To remove the sandpaper, simply peel
the sandpaper away from the hook &
loop pad (Fig. 3).

ON/OFF SWITCH

1. To turn the tool ON, slide the
ON/OFF switch (1) toward the front
of the tool (Fig. 4).
1
2. To turn the tool OFF, slide the ON/OFF
switch toward the rear of the tool.
Fig.4
12