Steps
1. Place the fan on the palm-rest and keyboard assembly.
2. Align the screw holes on the fan to the screw holes on the palm-rest and keyboard assembly.
3. Replace the two (M2x5) screws that secure the fan to the palm-rest and keyboard assembly.
4. Connect the fan cable to the connector on the system board.
Next steps
1. Install the
base
cover.
2. Install the
SD
card.
3. Follow the procedure in
Power-button board
Removing the power button
Prerequisites
1. Follow the procedure in
2. Remove the
SD
card.
After working inside your
Before working inside your
computer.
computer.
Removing and installing components
49