8 Listen to radio
Tune to a radio station
1
Press TUN repeatedly to select FM or
MW.
2
Press and hold
seconds.
[SEARCH] (search) is displayed.
»
The radio tunes to a station with
»
strong reception automatically.
3
Repeat step 2 to tune to more stations.
•
To tune to a weak station, press
/ repeatedly until you find optimal
reception.
Program radio stations
automatically
You can program a maximum of 40 preset
radio stations (30 FM, 10 MW).
1
In the tuner mode, press and hold PROG
for 2 seconds to activate automatic
program mode.
»
[AUTO] (auto) is displayed.
All available stations are programmed
»
in the order of waveband reception
strength.
»
The first programmed radio station is
broadcast automatically.
Program radio stations
manually
You can program a maximum of 40 preset
radio stations (30 FM, 10 MW).
1
Tune to a radio station. (See "Tune to a
radio station" section.)
2
Press PROG to activate program mode.
/
for more than 2
»
[PROG] (program) blinks on the
display.
3
Press ALB/PRESET+/- to allocate a
number to this radio station, then press
PROG to confirm.
»
The preset number and the frequency
of the preset station are displayed.
4
Repeat the above steps to program other
stations.
Tip
•
To overwrite a programmed station, store
another station in its place.
Select a preset radio station
1
In tuner mode, press ALB/PRESET+/- to
select a preset number.
Tip
•
Position the antenna as far as possible from
TV, VCR or other radiation source.
•
For optimal reception, fully extend and adjust
the position of the antenna.
Change MW tuning grid
In some countries, the MW radio frequency
step between adjacent channels is 9 kHz (10
kHz in some areas). The preset frequency step
is 9 kHz.
1
Select the tuner source.
2
Press and hold
more than 2 seconds.
»
The frequency step is changed to 9
kHz or 10 kHz.
»
All preset stations are erased and need
to be re-programmed.
on the main unit for
EN
17