3 Connect
Connect speakers
Note
•
Insert the stripped portion of each speaker
wire into the socket completely.
•
For optimal sound, use the supplied speakers
only.
•
Connect only speakers with impedance that is
the same or higher than the supplied speakers.
Refer to the Specifications section of this
manual.
1
For the right speaker, find the sockets on
the main unit marked 'RIGHT'.
2
Insert the red wire to the red (+) socket.
To insert each speaker wire:
a Hold down the socket flap.
b Insert the speaker wire fully.
c Release the socket flap.
3
Insert the black wire into the black (-)
socket.
4
For the left speaker, find the sockets on
the main unit marked 'LEFT'.
5
Repeat steps 2-3.
Connect power
Caution
•
Risk of product damage! Make sure that the
power supply voltage corresponds to the
voltage printed on the back or the underside
of the unit.
•
The unit is equipped with a voltage selector on
the back panel. It is preset at 220V from the
factory. For areas that operate at 110V-127V,
change the voltage selector to 110V-127V
before connecting the AC power supply.
•
Before connecting the AC power cord, ensure
you have completed all other connections.
Note
•
The type plate is located on the back of the
main unit.
1
Connect the AC power cord to the
power outlet.
EN
11