Table of Contents
Advertisement
4 Get started
Caution
•
Use the controls only as stated in this user
manual.
•
Always follow the instructions in this chapter
in sequence.
If you contact Philips, you will be asked for the
model and serial number of your apparatus. The
model number and serial number are on the
back of the apparatus. Write the numbers here:
Model No. __________________________
Serial No. ___________________________
Prepare the remote control
Caution
•
Risk of explosion! Keep batteries away from
heat, sunshine or fire. Never discard batteries
in fire.
To insert the remote control battery:
1
Open the battery compartment.
2
Insert 2 AAA batteries (not supplied)
with correct polarity (+/-) as indicated.
3
Close the battery compartment.
3
1
2
EN
12
Note
•
If you are not going to use the remote control
for a long time, remove the batteries.
•
Do not use old and new or different types of
batteries in combination.
•
Batteries contain chemical substances, so they
should be disposed of properly.
Auto install radio stations
When you connect the unit to the power
supply for the first time, or no radio station is
stored in this unit, Plug and Play is activated to
store all available radio stations automatically.
1
Connect the unit to the power supply.
»
[AUTO INSTALL - PLEASE PRESS
PLAY, STOP CANCEL] (press the
PLAY button to auto install; to cancel,
press ) displays.
2
Press
on the main unit to start
installation.
[AUTO] displays.
»
The unit automatically store radio
»
stations with sufficient signal strength.
When all the available radio stations
»
are stored, the first preset radio station
is broadcast automatically.
Set clock
1
Press and hold CLOCK/DISPLAY to
activate the clock setting mode.
The 12 hour or 24 hour format is
»
displayed.
2
Press PROG repeatedly to select 12 hour
or 24 hour format.
3
Press CLOCK/DISPLAY to confirm.
The hour digits are displayed and begin
»
to blink.
4
Press
/
to set the hour.
Advertisement
Table of Contents
