Maintenance - Dexter Laundry 450ETC1-18033.1 Instruction Manual

TO CHANGE WATER
• Unplug tile saw.
FR
• Pull out the water tank and empty into a bucket, do not allow water to splash onto ground or around
machine.
• Discard waste water in accordance with local regulations.
ES
CHANGING THE CUTTING BLADE
Remove the water tank, then undo the two screws holding the lower blade cover and remove the
PT
blade cover so that the blade is accessible.
Remove the blade nut and the outer flange washer from the spindle using supplied spanners (leave the
inner flange washer on the spindle)
IT
Make sure that the blade is mounted so that it rotates in the direction indicated by the arrow on the
lower blade cover.
First place the blade onto the spindle and then the outer flange washer and nut. Tighten the nut using
EL
the supplied spanners (Notice: The inner and outer flange washers are differrent).
Screw the lower blade cover back into place and reattach the water tank.
PL

8. MAINTENANCE

UA
RO
EN
CUTTING BLADE
The servicing of cutting blades should only be performed by a trained person.
Defective safety devices must be replaced immediately.
Check cutting blades regularly for faults. Replace a defective cutting blades immediately.
CLEANING
• Always allow the appliance to cool down after use.
• Remove all of the water from the tank.
• Clean the machine with a damp cloth and some soap. Use brushes or scrubbers to clean places that
are hard to reach and stubborn residue. Don't use any harsh cleaning agents or solvents. These could
adversely affect the plastic and metal parts of the tool.
• Keep the motor's vent openings free of deposits.
REPAIR
Damage should be repaired by qualified experts, only.
The equipment is supplied in packaging to prevent it from being damaged in transit. The raw materials
in this packaging can be reused or recycled.
The equipment and its accessories are made of various types of material, such as metal and plastic.
Defective components must be disposed of as special waste. Ask your dealer or your local council.
STORAGE
• Allow the cleaned machine to dry completely.
• Store the appliance and its accessories in a dark, dry, frost-free place. Always store the tool in a place
that is inaccessible to children. The ideal storage temperature is between 10 and 30°C.
• Always store the machine in its original packaging, if possible.
TRANSPORT
• Dismantle any components that protrude from the product.
• Use the original packaging to ship whenever possible.
• Protect the product from any heavy impact or strong vibrations which may occur during transpotation
in vehicles.
• Secure the product to prevent it from slipping or falling over.
• The tile cutter has one carrying handle (located on the front of the tile cutter cabinet) specifically
designed for convenient transportation. Never lift the machine on it's guard.
WARNING! Remove the plug from the power socket before
carrying out any adjustment, servicing or maintenance.
117