ADJ HYDRO SPOT 2 User Manual page 10

I N S T A L L A T I O N
CLAMP MOUNTING
This fixture features mounting points on the underside for the attachment of two Omega brackets.
Additionally, the unit also features a safety cable loop on the underside, near one of the carry handles
(see the illustration below). When mounting the fixture to a truss or any other suspended or overhead
installation, be sure to secure appropriately rated mounting clamps (not included) to each Omega
bracket. Please note that two Omega brackets and two mounting clamps are needed to safely
support the fixture in a suspended installation. Attach a separate SAFETY CABLE of the appro-
priate weight rating to the provided safety cable loop. NEVER use carry handles as an attachment
points for the safety cable.
MOUNTING
CLAMPS
SAFETY
OMEGA
CABLE
BRACKETS
LOOP
SAFETY CABLE:
ALWAYS ATTACH A SAFETY CABLE WHENEVER INSTALLING THIS FIX-
TURE IN A SUSPENDED ENVIRONMENT TO ENSURE THAT THE FIXTURE
WILL NOT FALL IF THE CLAMP FAILS.
10