Advertisement
XC-2 Ethernet Kit Quick Start Guide (1.1)
2.4 Troubleshooting the webserver application
LEDs do not light up
Check that the power supply is connected correctly.
X2LEDB LED does not light up
Check the ethernet cable is connected correctly to the XC-2.
May take up to a minute to obtain an IP address if no DHCP server on network.
X2LEDB LED lights up but browser cannot load http://xc2.local
Try installing Bonjour for Windows, available from: http://apple.com/downloads.
Disable any firewall you may have running.
Configure your PC and XC-2 to use a static IP address. See section 2.2.
2.5 Firmware Updates
You can check the webserver firmware version using the Board Information page
on the xc2.local website. Check www.xmos.com/xc2 for any firmware updates and
instructions on how to update the device.
3 XMOS Tools Support
The XMOS tools are provide in a single platform-specific downloadable file from
http://www.xmos.com/tools
Instructions on installing and using the XMOS Tools can be found in the XMOS
Tools User Guide http://www.xmos.com/published/xtools_en. The following table
provides a summary tools support for the XC-2 development board.
Minimum tools version required
Board support file
USB-to-JTAG adaptor
USB-to-JTAG driver
Board Tutorial
Hardware Guide
9.9
XC-2.xn
XTAG
FTDI
Integrated into XDE and available as PDF
http://www.xmos.com/published/xc2hw
www.xmos.com
5/6
Advertisement
