To use the webserver you need to plug the XC-2 board into a local network or your PC. Make sure that you disable any firewall you may have running before trying to connect to the website.
Page 4
XC-2 Ethernet Kit Quick Start Guide (1.1) 2.1 Connect the XC-2 to a network using DHCP Plug-in the XC-2 using the 5V power supply. The PLL LED on the bottom of the board lights up to indicate that the board has been powered up.
Page 5
Try installing Bonjour for Windows, available from: http://apple.com/downloads. Disable any firewall you may have running. Configure your PC and XC-2 to use a static IP address. See section 2.2. 2.5 Firmware Updates You can check the webserver firmware version using the Board Information page on the xc2.local website.
“Information”) and is providing it to you “AS IS” with no warranty of any kind, express or implied and shall have no liability in relation to its use. XMOS Ltd. makes no representation that the Information, or any particular implementation thereof, is or will be free from any claims of infringement and again, shall have no liability in relation to any such claims.