Chapter 2. Options; Chapter 3. Master Reset And Program Reset - Sharp XE-A212 Service Manual

CHAPTER 2. OPTIONS

1. OPTIONS (No)
2. SERVICE OPTIONS (No)
3. SUPPLIES
NO NAME
1 Roll paper
4. SPECIAL SERVICE TOOLS
NO NAME
1 RS-232 Loop-back connector

CHAPTER 3. MASTER RESET AND PROGRAM RESET

1. MASTER RESETTING
Master resetting clears the entire memory and resumes initial values.
Master resetting can be accomplished by using the following procedure:
Procedure A: 1) Plugin the AC cord to the wall outlet.
2) Set the mode switch to REG position.
3) Let the ECR be witout the memory backup battery.
4) Unplug the AC cord from the wall outlet.
5) Wait over 1 minute for discharging.
6) Plugin the AC cord to the wall outlet.
The master reset can also be accomplished in the following case.
In case power failure occurs when the machine has no battery
attached to it, the master reset operation is automatically performed
after the power has been restored.
(This is because if power failure occurs with no battery attached to
the machine, all the memories are lost and the machine does not
work properly after power recovery; this requires the master reset
operation.)
PARTS CODE
TPAPR6645RC05
PARTS CODE
UKOG-6705RCZZ
2. PROGRAM RESETTING
(INITIALIZATION)
This resetting resumes the initial program without clearing memory.
This resetting can be operated at below sequence in PGM mode.
Procedure:
Note: In case power failure occurs when the machine has no battery
attached to it, the master reset operation is automatically per-
formed after the power has been restored.
XE-A212V OPTIONS
– 5 –
PRICE
DESCRIPTION
RANK
AY 5roll/pack
PRICE
DESCRIPTION
RANK
BU
1) Unplug the AC cord from the wall outlet.
2) Wait over 1 muinite for discharging.
3) Set the mode switch to the PGM position.
4) While holding down the FEED key, plugin the AC
cord to the wall outlet.