FIBARO MOTION SENSOR Quick Start Manual page 7

First launch
Step 7
Install the sensor's holder in desired
location. Motion Sensor can be
mounted using screw or the sticker
Fig. 6
Resetting the Motion Sensor to factory defaults:
1. Open the cover
2. Press and hold the button
Button
Fig. 8
3. When the LED glows yellow, release the button
4. Click the button again to confirm
Step 8
Insert the Motion Sensor
in its holder
Fig. 7
!
After resetting the accessory
will blink red — it is ready
to be paired again.
7