Connections; Connecting To Television; Using Composite Video Jacks (Cvbs); Using Component Video Jacks (Ypbpr) - Philips DVP5220X/74 Manual

Connections

Connecting to television

COMPONENT
VIDEO IN
S-VIDEO
IN V (Pr/Cr)
AUDIO
OUT
U (Pb/Cb)
VIDEO IN
Y
IMPORTANT!
– You only need to make one video
connection from the following
options, depending on the
capabilities of your television.
– Connect the DVD player directly
to the television.
Using Composite Video jacks
(CVBS)
Use the composite video cable (yellow)
A
to connect the DVD player's TV OUT
(CVBS) jack to the video input jack (or
labeled as A/V In, Video In, Composite or
Baseband) on the television (cable
supplied).
To hear sound of this DVD player
B
through your television, use the audio
cables (white/red) to connect AUDIO
OUT (L/R) jacks of the DVD player to
the corresponding AUDIO IN jacks on
the television (cable supplied).
TIPS: Before making or changing any connections, make sure that all the devices are disconnected
from the power outlet.
8
01-43_dvp5220_74_eng.indd 8
COMPONENT
VIDEO IN
S-VIDEO
IN
V (Pr/Cr)
AUDIO
IN
U (Pb/Cb)
VIDEO IN
Y
1
2
DIGITAL
TV OUT
OUT
COAXIAL
COMPONENT
VIDEO IN
S-VIDEO
IN
V (Pr/Cr) AUDIO
OUT
U (Pb/Cb)
VIDEO IN
Y
1
TV OUT
IMPORTANT!
– The progressive scan video quality
is only possible when using YPbPr
and a progressive scan television is
required.
Using Component Video jacks
(YPbPr)
Use the component video cables (red/
A
blue/green) to connect the DVD player's
YPbPr jacks to the component video
input jacks (or labeled as YPbPr) on the
television (cable not supplied).
To hear sound of this DVD player
B
through your television, use the audio
cables (white/red) to connect AUDIO
OUT (L/R) jacks of the DVD player to
the corresponding AUDIO IN jacks on
the television (cable supplied).
Proceed to page 15 for detailed
C
progressive scan setup.
COMPONENT
VIDEO IN
S-VIDEO
IN
V (Pr/Cr)
AUDIO
IN
U (Pb/Cb)
VIDEO IN
Y
2
DIGITAL
OUT
COAXIAL
2008-01-21 10:04:05 AM