Getting Started; Step 1: Inserting Batteries; Using The Remote Control To Operate The System; Step 2: Finding Your Viewing Channel - Philips DVP5220X/74 Manual

Getting Started

Step 1 : Inserting Batteries
Open the battery compartment.
A
Insert two batteries type R0 or AAA,
B
following the indications (+ –) inside the
compartment.
Close the cover.
C
CAUTION!
– Remove batteries if they are
exhausted or if the remote is not to
be used for a long time.
– Do not use old and new or
different types of batteries in
combination.
– Batteries contain chemical
substances, so they should be
disposed of properly.
Using the remote control to
operate the system
Aim the remote control directly at the
A
remote sensor (IR) on the front panel.
Do not put any objects between the
B
remote control and the DVD player
while operating the DVD player.
1
01-43_dvp5220_74_eng.indd 14
DISC
MENU DISPLAY
RETURN
TITLE SETUP
PREV NEXT
PLAY/PAUSE
STOP MUTE
SUBTITLE AUDIO
ZOOM REPEAT
REPEAT A-B
Step 2 : Finding your viewing
channel
Press STANDBY-ON 2 on the DVD
A
player to turn it on.
Turn on the TV and set it to the correct
B
video-in channel. You should see the blue
DVD background screen.
Usually these channel are between the

lowest and highest channels and may
be called FRONT, A/V IN, VIDEO.
See your TV's manual for more
details.
Or, you may go to channel 1 on your

TV, then press the Channel down
button repeatedly until you see the
Video In channel.
Or, the TV remote control may have

a button or turn that chooses
different video modes.
Or, set the TV to channel  or  if

you are using an RF modulator.
If you are using external equipment, (such
C
as audio system or receiver), turn it on
and select the appropriate input source
for the DVD player output. Refer to the
equipment user's manual for detail.
2008-01-21 10:04:06 AM