Digicom PALLADIO ISDN User Manual page 41

PALLADIO ISDN
S S Registers
Show and change the contect of "r" register(see S register description)
Sr=xxx Store the number xxx, in the "r" register (from 0 to 255).
Sr? Display the value of "r" register
V Numeric and Verbose Messages
Select the type of the return code from ISDN modem to the Computer. Can
be selected the numeric mode to manage ISDN modem by a PC and the
verbose mode to manage ISDN modem by an operator.
Using the numeric mode the return codes are followed by the <CR> char.
Using the verbose mode the return codes are preceded and followed by the
<CR> and <LF> characters.
V0 Return codes displayed in numeric mode
V1 Return codes displayed in verbose mode
X Select Return Codes
Select the return code types.
X0 Enable return codes from 0 to 4
X1 Enable all return codes
7.3
AT Command Set
Default= n/a
Default= V1
Default=X1