Installation Of The Support - Create WARM TOWEL TOOL User Manual

Before you start, check that all parts are included.
• Remove the packaging, being careful not to discard any parts.
• It is necessary that the electric towel rail to which it is installed is not hooked to the wall
and, if possible, has the legs on for a better hold of the appliance.
• Using a screwdriver, loosen and remove the parts with the screw from the bracket.
• Next, proceed to place the shelf on the towel rack. The electric towel rail must be in a
vertical position and the support is placed between the gap of two shelves of the towel rail
in a horizontal position.
• While holding the support, screw the shelf from the back of the towel rail with the screw
part and the help of a screwdriver. First one side and then the other without tightening,
when both are in position, tighten the screws for a better hold.
• When the shelf is securely fastened, place the trims on the screw piece.

INSTALLATION OF THE SUPPORT

E NGLI SH
7