Seats - freightliner Cargo Manual

Vehicle Access and Features
7. Place your right foot on the top step.
8. Bring your left foot to the bottom step.
9. Bring your right foot down to the ground, then bring
your left foot down to the ground.

Seats

IMPORTANT: When adjusting the seats, unless
otherwise noted, make all adjustments while
seated and before the engine is started.
WARNING
Keep hands, tools, and other objects away from the
scissor points under the seats. Failure to do so
could cause personal injury.
National Cush-N-Aire II Seat
Back Cushion Tilt
To tilt the back cushion, turn the knob and lean forward
or backward. See Fig. 2.5.
Height Adjustment
To raise the seat, push the rocker switch on the side of
the seat up until the seat reaches the desired height. To
2.5
lower the seat, push the rocker switch down until the
seat reaches the desired height.
Fore and Aft Seat Adjustment
Move the lever to the left and slide the seat forward or
backward to the desired position.
Bottom Cushion Front Height
To adjust the height of the front of the bottom cushion,
lift the handle, and pull forward or push back to the de-
sired setting.
Lumbar Support
Push the rocker switch on the side of the seat up to
inflate lumbar support. Push the rocker switch down to
deflate lumbar support.
Back-of-Cushion Height
To adjust the height at the back of the cushion, rotate
the lever to the desired setting.
Isolator, Optional
Also called a Chugger-Snubber, the isolator is locked
out by moving the handle down.