Safety Instructions; Eu Declaration Of Conformity; General Instructions - flamco LogoTronic HIU V2 Operating Instructions Manual

1. Safety instructions

Read the instructions carefully before installation and operation.
The controller and the APP work only in conjunction with the relevant Flamco-Meibes
apartment stations.

1.1 EU declaration of conformity

By affixing the CE mark to the equipment, the manufacturer declares that the LogoTronic HIU
controller is compliant with the relevant provisions:
• Radio Equipment Directive (RED) 2014/53/EU
• Low Voltage Directive (LVD) 2014/35/EU
• Electromagnetic Compatibility Directive (EMCD) 2014/30/EU
• Restriction of hazardous substances (ROHS) 2011/65/EU.
Proof of conformity has been forthcoming, and the relevant documents and EU conformity
declaration can be requested from the manufacturer.

1.1.1 General instructions

Please read!
These installation and operating instructions contain basic instructions and important information
concerning the safety, installation, commissioning, maintenance and optimal use of the equipment.
For this reason, the installer / specialist and operator of the system must thoroughly read and
observe them prior to installation, commissioning and operation of the equipment. This device is an
automatic electrical controller. This device may only be installed in dry spaces and under the ambient
conditions described in the "Technical data" section.
You must also observe the relevant accident prevention regulations, the regulations of the electrical
engineering association and your local energy supply company, the relevant DIN-EN standards and
the installation and operating instructions of any additional system components.
This device is in no way intended to replace any safety equipment that you may be required to install!
Installation, connection to the electricity supply, commissioning and maintenance of the equipment
may be carried out only by an appropriately qualified specialist.
For the operator: You must ask the specialist to offer comprehensive training in the function and
operation of the equipment. Always keep these instructions close to the equipment.
The manufacturer will not be liable for any damage that may arise through the improper use of the
equipment or failure to follow these instructions!
4
LogoTronic HIU Controller für LogoMatic G2