flamco LogoTronic HIU V2 Operating Instructions Manual page 17

Perform commissioning (please also refer to the MA/SA for the LogoMatic G2):
1. Connect controller to power source
2. Run the Flamconnect app
3. Scan the QR Code on the controller
A) Label with QR Code
4. Enter connection code
B) Passkey: Input required to pair
the smart device with the
controller.
In the Flamconnect app, you will be guided step-by-step through the commissioning process.
The settings can be activated and changed at any time via the app.
Configuration: Please follow the further steps in the app
Note: You can also use the app to download additional relevant documents and instructions.
The illustrations are symbolic and may deviate from the actual product. Subject to technical
modifications and errors.
A) QR Code on the controller: B) QR Code and passkey, e.g.:
We reserve the right to change designs and technical specifications of our products.
17