Gs L Nl Nh - Citizen iDP3240 User Manual

GS L nL nH

[Function]
[Code]
[Range]
[Outline]
[Caution]
[Default]
[See Also]
Setting the left margin
<1D>H<4C>H<nL><nH>
0 nL 255
0 nH 255
This command sets the left margin specified by nL and nH. The
value of the left margin is [(nL + nH
pitch].
Printable Area
Left Margin Print Area Width
• This command only works when it is entered at the beginning
of a line.
• The setting of this command does not affect PAGE MODE.
• The maximum settable left margin is equal to the horizontal
printable area. A setting greater than this maximum is trimmed
to the maximum.
• The basic calculation pitch is defined by GS P. Once defined,
the left margin is not changed if the basic calculation pitch is
changed by GS P.
• The left margin is calculated with the horizontal basic
calculation pitch (x) set by GS P. A fraction resulting from the
calculation is corrected with the minimum pitch of the
mechanism, and the remainder is omitted.
nL = 0, nH = 0
GS P, GS W
— 107 —
256) basic calculation