Manually Store Channels - Philips 19PFL3403/10 User Manual

1. Press MENU on the remote control and
select Install > Auto store.
2. Press Æ to select Start.
3. Press OK to confirm.
4. When the channel search is complete, press
MENU to exit.
6.2

Manually store channels

This section describes how to search and store
analogue TV channels manually.
Step 1 Manual store
1. Press the MENU on the remote control
and select Install > Manual store.
Main Control
Install
Language
Country
Auto store
Manual store
Channel setting
Factory reset
2. Select System, and press Æ to select one
The TV will allow you to search for the avaliable channel.
of the following systems:
Europe (automatic detection*)
•
France (L/L' standard)
•
Eastern Europe
•
UK (I standard)
•
Western Europe
•
3. Select Manual store and press Æ to start
the store.
When a programme is found, the scanning
stops and the program name is displayed
(when available). Go to the next step. If
you know the frequency of the required
programme, you can enter it by pressing
the 0 to 9 keys. If no picture is found,
consult the possible solutions. See Section 9.
Troubleshooting.
6 Manual store
System
Manual store
Prog. no
Finetune
Store
(DK standard)
(BG standard)
4. Select Prog. No., and press the number
0 to 9 or Î / ï to enter the program
number.
5. Select Finetune, and press Î or ï to
adjust the tuning.
6. Select Store and press Æ to store the
program.
7. Repeat the above steps for each program
you want to store.
8. Press MENU to exit.
Step 2 Channel setting
You can set the name and number for a
channel and order the channels.
1. Press the MENU the remote control and
select Install > Channel setting.
5
2. Press Î or ï to highlight an option, and
press Æ to select the option.
Main Control
Install
Language
Country
Auto store
Manual store
Channel setting
Factory reset
Channel edit
The TV will allow you to edit channel and name or channels
•
sorting.
Channel swap:
•
channel to the destination channel.
Name edit:
•
Press Í, Æ to move around the name
•
display area.
Press Î, ï to select the characters.
•
Press Æ to exit. The name is stored.
•
Channel sort:
•
and alphabetical order.
6 Channel setting
Channel edit
Channel swap
Name edit
Channel sort
: select a channel for edit.
switch the selected
name a channel.
arrange channels in numeric
4
EN-17