Related Manuals for Candela MGentleLASE
Summary of Contents for Candela MGentleLASE
- Page 1 Candela Corporation MGentleLASE Focus Lens Replacement Procedure MGentleLASE Focus Lens Replacement Procedure 8503-01-0827, Revision A Candela Corporation Proprietary Page 1 of 5...
- Page 2 MGentleLASE Focus Lens Replacement Procedure Candela Corporation Page 2 of 5 Candela Corporation Proprietary 8503-01-0827, Revision A...
- Page 3 Candela Corporation MGentleLASE Focus Lens Replacement Procedure FOCUS LENS REPLACEMENT NOTE: Exercise extreme care. Cleanliness of optics is essential. Refer to Service Procedure 8503-01-0060 for optic cleanliness. Refer to drawings 7122-00-3298, 7122-00- 3300 and 7122-00-3325 for specific details. CAUTION: The high voltages present in this system are LETHAL. This procedure...
- Page 4 MGentleLASE Focus Lens Replacement Procedure Candela Corporation Removing the Lens: • Remove Jam nut. • Pry out the first lens with Exacto knife, or turn the barrel upside down and tap it sharply onto a clean piece of paper on a table.
- Page 5 Candela Corporation MGentleLASE Focus Lens Replacement Procedure Attach the plate (item 5), in orientation shown, onto the lens housing with hardware (2 ea.- items 6 and 7). Fully tighten the screws, then back out ½ turn each. Carefully rotate the plate (with housing attached), if needed, so that the plate’s (4) mounting holes are aligned with the (4) threaded holes in the receptacle body.
Need help?
Do you have a question about the MGentleLASE and is the answer not in the manual?
Questions and answers