Watch Tv; Access Dvb-C And Dvb-T Channel; NetwOrks - Philips 37PFL5603D/10 User Manual

4�2

Watch TV

4�2�1 Switch channels
• Press a number (1 to 999) or press
on your remote control.
• Press PROGRAM +/- on the side controls
of the TV.
• Press on the remote control to return
to the previously-viewed TV channel.
4�2�2 Switch channels (digital receiver)
1. Switch on the digital receiver.
2. Press SOURCE on the remote control
then select the input your digital receiver is
connected to.
3. Press OK to select the digital receiver.
4. Use the remote control of the digital
receiver to select TV channels.
EN-12
4�2�3 Adjust volume
• Press
control.
• Press
controls of your TV.
P +/-
• Press
the sound. Press
sound.
Note
D
If headphones are connected, adjust
headphone volume as described in Section
5.3.5 Adjust sound settings. You must press the
MUTE button on the remote control to
mute audio from the TV speakers. Pressing
VOLUME +/- buttons turns on the TV
speakers again.
4�3 Access DVB-C and DVB-T
channel networks
If you have both DVB-C and DVB-T installed,
you can access channels from both networks.
1. Press
2. Select
Installation mode.
3. Select
or Antenna (to access DVB-T channels).
4. Switch between DVB-C or DVB-T channels
as described in Section 4.2.1 Switch channels.
Note
D
For instructions on how to install DVB-C
and DVB-T channels, see Section 6.1
Automatically install channels.
VOLUME + or - on the remote
VOLUME + or - on the side
on the remote control to mute
again to un-mute the
MENU.
TV menu > Installation >
Cable (to access DVB-C channels)