Active Control - Philips 37PFL5603D/10 User Manual

follow the on-screen instructions to
change the value of:
- R-WP (Red White Point)
- G-WP (Green White Point)
- B-WP (Blue White Point)
- R-BL (Red Black Level)
- G-BL (Green Black Level)
• Dynamic contrast
Enhances the contrast in the picture as the
image on the screen changes.
Set the level to Minimum, Medium,
Maximum or Off. Medium is
recommended.
• Noise reduction
Filters and reduces the noise in the picture.
Set the level to Minimum, Medium,
Maximum or Off.
• Colour enhancement
Makes colours more vivid and improves the
resolution of details in bright colours.
Set the level to Minimum, Medium,
Maximum or Off.

• Active Control

Corrects all incoming signals to provide
the best picture possible. Switches Active
control On or Off.
• Light sensor
Adjusts picture settings to match lighting
conditions in the room. Switches Light
sensor On or Off.
Note
D
Not available on all TV models.
• Picture format
See Section 5.3.4 Change picture format.
5�3�3 Use smart settings
Apart from manually adjusting picture settings,
you can use smart settings to set your TV to a
predefined picture and sound setting.
1. Press MENU on the remote control and
select TV menu > TV settings > Reset
smart settings.
2. Press Æ to enter the list.
3. Press Î or ï to select one of the following
settings:
• Current
Applies manually selected picture and
sound settings.
• Standard
Applies natural picture and sound
settings suitable for most living room
conditions.
• Vivid
Applies brilliant picture and sound
settings suitable for bright surroundings.
• Movie
Applies dynamic picture and sound
settings suitable for a complete
cinematic experience.
4. Press the green key to store your selection.
EN-19