Gree GWH09AGA-K6DA1A Service Manual page 48

Service Manual
WiFi
When WiFi function is turned on, " WiFi " icon will be displayed
on the remote controller; when WiFi function is turned off,
" WiFi " icon will disappear.
How to turn on WiFi: Press " WiFi " button to turn on WiFi
function.
How to turn off WiFi: Hold " WiFi " button for 5s to turn off WiFi
function.
Under off status, press "MODE" and " WiFi " buttons
simultaneously for 1s, WiFi module will restore factory
settings.
This function is only available for some models.
Press this button to achieve the on and off of health and
scavenging functions in operation station. Press this button for
" ". Press the button for the second time to start health and
scavenging functions simultaneously; LCD displays
" " and " ". Press this button for the third time to quit
health and scavenging functions simultaneously. Press the
button for the fourth time to start health function; LCD display
" ". Press this button again to repeat the operation above.
This function is applicable to partial of models .
LIGHT
Press this button to turn off display light on indoor unit. "
icon on remote controller disappears.
Press this button again to turn on display light. "
displayed.
TEMP
Press this button, you can see indoor set temperature, indoor
ambient temperature on indoor unit' s display. The setting on
remote controller is selected circularly as below:
no display
Function introduction for combination
buttons
Energy-saving function
Under cooling mode, press "TEMP" and "CLOCK" buttons
simultaneously to start up or turn off energy-saving function.
When energy-saving function is started up, "SE" will be shown
on remote controller, and air conditioner will adjust the set
temperature automatically according to ex-factory setting to
reach to the best energy-saving effect.
Press "TEMP" and "CLOCK" buttons simultaneously again to
exit energy-saving function.
Technical Information
Notice:
Under energy-saving function, fan speed is defaulted at
auto speed and it can't be adjusted.
Under energy-saving function, set temperature can't be
adjusted. Press "TURBO" button and the remote controller
won't send signal.
Sleep function and energy-saving function can't operate at
the same time. If energy-saving function has been set under
cool mode, press sleep button will cancel energy-saving
function. If sleep function has been set under cool mode, start
up the energy-saving function will cancel sleep function.
8℃ heating function(This function is not available for cool
only models.)
Under heat mode, press "TEMP" and "CLOCK" buttons
simultaneously to start up or turn off 8
When this function is started up, "
shown on remote controller, and the air conditioner keep the
heating status at 8
simultaneously again to exit 8
Notice:
Under 8
speed and it can't be adjusted.
Under 8
adjusted. Press "TURBO" button and the remote controller
won't send signal.
Sleep function and 8
same time. If 8
"
mode, press sleep button will cancel 8
sleep function has been set under heat mode, start up the 8
" icon is
heating function will cancel sleep function.
Under
display 46
Child lock function
Press "▲" and "▼" simultaneously to turn on or turn off
child lock function. When child lock function is on, "
is displayed on remote controller. If you operate the remote
controller, the "
signal to the unit.
Temperature display switchover function
U n d e r O F F s t a t u s , p r e s s " ▼ " a n d " M O D E " b u t t o n s
simultaneously to switch temperature display between
.
Auto clean function
Under unit off status, hold "MODE" and "FAN" buttons
simultaneously for 5s to turn on or turn off the internal clean
function. When the internal clean function is turned on,
indoor unit displays "CL" . During the self-cleaning process of
evaporator, the unit will perform fast cooling or fast heating.
or thermal expansion or cold shrinkage. The air conditioner
may blow cool or warm air, which is a normal phenomenon.
. Press "TEMP" and "CLOCK" buttons
heating function.
heating function, fan speed is defaulted at auto
heating function, set temperature can't be
heating function can't operate at the
heating function has been set under heat
temperature display, the remote controller will
heating.
" icon will blink three times without sending
heating function.
" and "8 " will be
heating function. If
" icon
and
45