Page 1
DMH-541 Digital modulator DVB-T/C HD MPEG4 AVC with HDMI input and USB playback 4K UltraHD HDMI 2.2 Loop through Hight RF Output Level USB pen drive video player Perfect image and audio synchronization RF Loop through 5... 2.200 MHz Video bit rate up to 30 Mbps...
DESCRIPTION OF SYMBOLS AND ELECTRICAL SAFETY The equipment complies with the CE requirements The equipment is designed for indoor use only Equipment grounding terminal This symbol indicates that the equipment complies with the safety requirements for class II equipment To avoid the risk of electric shock, do not open the equipment. CAUTION The equipment is compliant with RoHS 2011/65EU Dispose according to local authorities recycling processes...
Page 3
20 cm 20 cm 20 cm Power supplier IN 100-240VAC OUT 15VDC 1,25A 20 cm IMPORTANT! Place the apparatus and the power supplier in a dry and well-aired location Install the unit on a vertical wall, or in a waterproof cabinet with a minimum IP55 rating, and fix it safely using the provided fixing plugs Use only the power supplier provided with the amplifier.
Page 4
DMH-541 DESCRIPTION USB Type B (F.W. Upgrade) USB Type A (USB Pendrive for Video Play) Power Input 15Vdc Power Supply Status Led Confirmation key Menu navigation keys Ground point HDMI Input HDMI Output 1 10 RF Input 1 11 RF Output...
Page 5
1_Connect the RF coaxial input and output cables 2_Connect the HDMI input and output cables 3_ Connect the power supplier unit to DMH-541 and only then connect the power supplier to mains plug. Wait the end of the booting procedure to start...
figures keys S E T T I N G . . . DMH-541 has a built-in DVB-T/C tuner for self test. Every parameter modification is verified P L E A S E WA I T and stored and require from 10 to 15 seconds.
To confirm your selection press 00001 ÷ 65535 If in the network there are more than one DMH-541 to avoid TSID conflict Country preset parameters when the LCN number is changed also L C N : 0 0 1 0 1 the TSID is automatically reassigned.
AUDIO VIDEO SETUP VIDEO SET UP Press to enter the menu to select the video V I D E O compression required. VIDEO MODE Position the function selector > on MODE and press V I D E O to activate the pointer --- and select >...
Page 9
MODULATION M O D U L AT I O N Press to enter the MODULATION menu. MODULATION MODE Position the function selector > on DVB and press M O D U L AT I O N to activate the pointer --- and select the DVB-T or >...
Page 10
ENCODER Press to enter the ENCODER menu E N C O D E R Line up the function selector > to the parameter and press to activate the pointer --- and select the value pressing . To confirm the selection press Video Resolution Bit Rate...
E X I T press . Select YES and press to confirm. C O N F I R M ? To continue the DMH-541 setting select NO and press to confirm. Y E S RESET To cancel all settings select the RESET menu...
Need help?
Do you have a question about the DMH-541 and is the answer not in the manual?
Questions and answers